Product Full Description
DESCRIPTION: This product is compounded with polymer composites, petroleum solvent and pigment. It can naturally solidify and form a layer of elastic film. Just spray on the wheel, then the wheel will turn to the color you want. Tear it off when you don't need, leaving no marks. It also can be damp proof , acid proof and anti friction and anti corrosion, it is a superior protection to the wheel USE DIRECTION: 1. Remove the rust, dirt and rust on the wheel, and dry it 2. Fully cover the unnecessary sprayed parts with plastics film, newspaper or paper card. 3.shake it well, and then try to spray it in a similar area. After everything looks good (5min later), spray it in a larger areas. 4. Press the nozzle and spray it back and for that the distance of 15-25cm from the object to ensure the evenly spraying 5. Wait for 30min until it solidified ATTENTION: 1. Before spraying, fully cover the unnecessary parts 2.When spraying keep the angle between can and level less than 45C 3. After spraying, leave it natural drying for 4-8 hours and it's better not to wash your car in 2 days 4.In case of the normal spraying in winter, soak it in the water around 25-30C 5-10min then spray again. 5. it cannot use up one time, need to spray upside down for 3sec to remove the residue for next time using 6. Avoid contacting with diesel, alcohol and other organic solvent. 7. Store it under the temperature below 40C and keep away from heat and flame. 8. Forbid sun exposing, puncturing or burning. 9. Keep it away from children. Avoid get in eyes, forbid eating
Information on technical characteristics, the delivery set, the country of manufacture and the appearance of the goods is for reference only and is based on the latest information available at the time of publication.